Table of Contents
Advertisement
Mounting the CDG-8800 PRO
Installing the unit in a rackcase
Mount the CDG-8800 PRO into a console or rack with 19" rack rails. It can be mounted using 4 screws. Make sure
the holes are aligned evenly and screw them in using an alternating "X" rotation to ensure even tension and align-
ment.
NOTE: The player unit and the external controller require 2 RUs of rack-space each. In order mount both, you must
have at least 4 RUs of available rack-space.
1
3
The player will operate properly when the main unit is mounted with the front panel at an angle within 15 degrees of
the vertical plane. If the unit is tilted excessively, discs may not load or unload properly.
CD/CDG Player Unit
4
2
Max.
15
6
45
5
Controller Unit
Advertisement
Table of Contents
