Jenn-Air JS42NXFXDW00 Installation Manual page 16

Install Top Grille Filler (standard installation only)
IMPORTANT: The grille panel height allows the necessary airflow
for refrigerator performance. The top grille filler hides the upper
compartment cover behind the top grille. If you choose to modify
the recommended grille panel dimensions, performance will be
compromised.
Custom Wood Panel Models
1. In the custom made (1" x width of grille panel) wood filler
piece, drill a hole " from each edge.
NOTE: Make sure the hole is centered in the 1" thickness of
the wood piece.
2. Using slotted hex head screws (provided), fasten an "L"
bracket to each end of the wood filler piece.
3. Using hex head blunt screws (provided), attach the "L"
brackets to the top grille mounting plates.
4. Adjust the "L" brackets, so that the wood filler piece is flush
with the bottom of the soffit. Completely tighten the screws.
A
B
C
A. Custom wood filler
B. "L" bracket
Side View
A
A. Top grille filler
B. Soffit
C. Airflow
16
C. Grille mounting plate
B
C
D
E
D. Grille panel
E. Door panel
Panel Kit Models
WARNING
Excessive Weight Hazard
Use two or more people to move and install panels.
Failure to do so can result in back or other injury.
1. Align top grille filler (provided in the door kit) with the bottom
edge of the soffit. Use as a template, and mark where to drill
the holes.
2. Using the slotted hex head screws (provided), attach the top
grille filler to the soffit.
A. Top grille filler
B. Hex head screw (provided)
Side View
A. Soffit
B. Airflow
Drilling Templates (custom wood panels only)
IMPORTANT: The template can be used for either a
or a " (0.32 cm) reveal installation.
The drilling templates are double-sided.
On the template, locate the diagram of your refrigerator. Then,
follow the letters and colored arrows to correctly place the
drilling template on the panels.
The drilling holes are precut into the template.
A
B
A
B
C
D
C. Grille panel
D. Door panel
" (0.95 cm)