Verizon Wireless MiFi 2200 Product User Manual page 64

How do I uninstall the previously installed software?
To uninstall the previously-installed software, see the following instructions.
Windows: Uninstall the software using the Control Panel feature in Windows. See Windows
➤ ➊
Help for more information.
NOTE
For best results, uninstall VZAccess Manager first, then uninstall Zain MiFi Broadband Generic
Drivers, and then uninstall Verizon Wireless Firmware Updates (if present).
Mac OS X: When the VZAccess Manager software is running, select the VZAccess Manager
➤ ➊
menu. Then click Uninstall VZAccess Manager. Follow the onscreen instructions. Restart the
computer to finish removing the files.
My MiFi powered off when I plugged it in to the wall charger. Why?
This occurs if any power settings are activated once the device is plugged into the wall charger.
Manually press the power button to turn it back on.
➤ ➊
My MiFi just powered off without my pressing the power button. Why?
This may occur under any of the following circumstances.
» Pressing the Master Reset button.
» Restarting the device.
» Switching profiles.
» Restoring the configuration settings.
» Battery depleted.
Manually press the power button to turn it back on.
➤ ➊
If battery is depleted, charge the device with the wall charger or USB cable.
➤ ➊
How do I reset MiFi back to factory settings?
The master reset button is in a small hole located on the bottom of the device. This button returns
the device to factory settings, including re-setting the network name (SSID) and network key (WiFi
passkey) to those printed on the sticker affixed to the back of the device.
1. Place one end of an unfolded paper clip in the master reset button hole.
2. Press the paper clip on the button until the Service Status LED blinks green one full blink and
then a very brief blink (about five seconds).
How do I reset the Access Point and Router settings back to factory settings?
When MiFi is in WiFi mode, you can connect to MiFi Settings by connecting your computer to the
MiFi wireless network and going to http://192.168.1.1 in your browser.
Connect to the Diagnostics screen. [See
Factory Defaults button. This button resets all Access Point and Router settings to their factory default
values. All existing settings are lost.
Diagnostics ] The Diagnostics screen has a Reset to
(page 54).
63