Set Up The Software - Verizon Wireless MiFi 2200 Product User Manual

Set Up the Software

Set up the software (Windows)
➊ ➊
Turn on MiFi 2200. [See
IMPORTANT
Both LEDs must be green for the software to detect the device correctly.
➋ ➊
Launch VZAccess
The VZAccess
SM
Tip!
If the device is not fully turned on (both LEDs green) when you launch the software, a "A wireless
device was not detected!" message opens. Turn the device on, then click OK, ensure the device type
is set to Auto Detect, and then click Start to detect the device.
➌ ➊
Click Connect WWAN.
Power MiFi 2200 On and Off
Manager.
SM
Manager window opens.
] Be sure both LEDs are green.
(page 19).
21