Connect The Device To The Computer With The Usb Cable - Verizon Wireless MiFi 2200 Product User Manual

➎ ➊
Plug the other end of the AC wall charger into the appropriate electrical outlet. Charge for at
least two and a half hours.
CAUTION!
Use only batteries and chargers with your device that have been approved by
Verizon Wireless or Novatel Wireless. The failure to use approved batteries and chargers may
increase the risk that your device will overheat, catch fire, or explode, resulting in serious bodily
injury, death, or property damage.
You are now ready to install the drivers and VZAccess Manager software. The first time you use the
device, you must connect MiFi 2200 to your computer with the microUSB cable (included).

Connect the Device to the Computer with the USB Cable

To connect the device to the computer
➊ ➊
Grip MiFi 2200 by its sides and gently connect the small end of the microUSB cable to the
microUSB port on the device.
The cable should fit easily into the device. Do not force the cable into the device as this might
damage both the cable and the device.
➋ ➊
Connect the large end of the microUSB cable to your computer's USB port.
The cable should fit easily into the port. Do not force the cable into the port as this might
damage both the cable and the port.
NOTE
If you have difficulty inserting the cable into your computer's USB port, verify that you are inserting
the cable in the correct orientation and that you are using a Type A USB port.
The following occurs:
➊ ➊
The status icon appears in the system tray / notification area (Windows) or in the menu bar
(Mac).
n
18