Buttons - Verizon Wireless MiFi 2200 Product User Manual

The Connected Devices section shows the following information for each device connected to the
network.
IP Address — The IP address for the connected device.
•
IP Type — This can be DHCP if the IP address came from MiFi 2200, or ARP if the ARP protocol
•
was used.
Hostname — The network name for the connected device (if available).
•
MAC Address — The MAC address for the connected device.
•
NOTE
The MAC address on the Windows operating system is called the Physical Address.
Date/Time — The date/time the device was detected by the network.

Buttons

The Refresh button re-loads the LAN screen to show changes to the list of connected devices, such as
a device that recently joined or left the network.
The Apply button applies any changes you made to MiFi 2200's IP address or subnet mask.
IMPORTANT
Changing MiFi 2200's IP address ends all WiFi connections to MiFi 2200, including
the current connection to MiFi Settings. You must re-connect your computer to MiFi 2200 using
the new IP address.
Be sure to write down the new IP address before you finish changing the profile.
43