Upgrading On A Management Server - HP EVA P6000 Software Manual
Enterprise virtual array updating product software guide (xcs 10001000)
Hide thumbs
Also See for EVA P6000:
- User manual (298 pages) ,
- Specification (47 pages) ,
- Reference (40 pages)
Table of Contents
Advertisement
Follow the procedures in this section to upgrade HP P6000 Command View on the management
server. If you are using array-based management, see
32)
for upgrade instructions.
NOTE:
Before starting the upgrade, check the release notes for the version to which you are
upgrading for any details on the upgrade process.
TIP:
To help ensure fast recovery from the upgrade, it may be useful to remove a disk from the
management server.
For supported upgrade paths, see Table 2.1, HP P6000 Command View upgrade support, in the
HP P6000 Enterprise Virtual Array Compatibility Reference.
For more information on HP P6000 Command View and to download the HP P6000 Command
View Installation Guide and the release notes, go to the website listed in
(page
6).
Upgrading on a management server
This procedure is for a typical HP P6000 Command View installation on a management server.
To use the custom installation procedure, which lets you select the components to install, see the
HP P6000 Command View Installation Guide for instructions.
To install the complete software suite:
1.
Close all applications running on the management server.
2.
Insert the installation DVD in the drive.
3.
Browse to the installation DVD.
4.
Double-click HP StorageWorks Command View EVA Software Suite.exe to start
the installation.
The InstallAnywhere Command View window opens.
5.
Select the preferred language from the drop-down menu (English or Japanese). (On an English
Windows system, the drop-down menu contains only English; on a Japanese Windows system,
the drop-down menu contains both English and Japanese.)
Click OK.
The Introduction window opens.
6.
Click Next.
The CV EVA License Agreement window opens.
7.
Read and accept the terms of the license agreement.
8.
Click Next.
The Choose Install Set window opens.
Command View Enterprise Virtual Array Performance Monitor and SMI-S CIMOM are selected
by default.
9.
Click Next.
The Select Security Groups Configuration window opens.
10. Click Next.
The installation summary window opens.
1 1. Review the pre-installation summary. Click Install.
"Upgrading the management module" (page
"Reference documentation"
Upgrading HP P6000 Command View
31
Hide quick links:
Advertisement
Table of Contents
