Canon imageCLASS MF5950dw Settings Manual page 13

"Wireless connection failed."
An error occurred on the machine while specifying the settings, resulting in a communication
failure.
Turn the machine OFF and ON, then set the machine again.
Check the network connection if the message still appears.
"Open authentication failed. Check WEP settings."
Connection failed because the authentication method is set to <Open System> for the machine
and "Shared Key" set for the wireless LAN router or access point you are using.
Manually set the authentication method of this machine to <Shared Key>
according to the wireless LAN router or access point you are using.
Check the network connection if the message still appears.
"Could not connect. Check PSK settings."
The network key for the wireless LAN router or access point is not set to the machine correctly.
Check the wireless LAN router or access point network key.
(
[Correct settings]
[Incorrect Settings]
Proceed to "Step4-A Setting the Machine Using the WPS (Push Button Mode), " on p.1-4.
Proceed to "Step4-B Setting the Access Point Manually and Connecting, " on p.1-6.
Proceed to "Checking Network Connections, " on p.2-6.
Proceed to e-Manual "Network Settings"- "Basic Network Settings" -"Connecting to a Wireless
LAN" - "Setting by Manually Entering SSID"
Proceed to "Checking Network Connections, " on p.2-6.
Proceed to "Checking SSID or Network Key, " on p.1-6.)
Proceed to "Checking Network Connections, " on p.2-6.
Proceed to "Step4-B Setting the Access Point Manually and Connecting, " on p.1-6.
Check the network connection.
Enter the correct network key and specify the set-
tings again.
Troubleshooting
2-3