Word Processing 9-3 - Epson LQ-850 User Manual

Word Processing
ESC a
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for
0: Selects left justification.
1: Selects centering.
2: Selects right justification.
3: Selects full justification.
The default setting is
performed when the buffer becomes full; HT BS and spacing
commands should not be used with justification. For n = 3 there
must be no carriage returns within a paragraph.
ESC SP (space)
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Sets the amount of space added to the right of each character, in
addition to the space already allowed in the design of the
character. The number of dots is determined by n, which should
be from 0-127. Each unit of space is 1/120th of an inch in draft
and 1/180th of an inch in Letter Quality and proportional.
Double-wide doubles the unit of space.
ESC
27
1B 61
= 0. Full justification (n = 3) is
ESC SP
27 32
1B 20
Select Justification
n:
Set Intercharacter Space
9-31