Data Control; Vertical Motion - Epson LQ-850 User Manual

Data Control

CR
Format:
ASCII code: CR
Decimal :
Hexadecimal: 0D
Comments:
Prints the data in the buffer and returns the print position to the
left margin. A line feed may be added if the AUTO FEED XT line
on the parallel interface is held LOW or if DIP switch 2-8 is on.
CAN
Format:
ASCII code: CAN
Decimal :
Hexadecimal: 18
Comments:
Removes all text on the print line, but does not affect control
codes.

Vertical Motion

Form feeding
FF
Format:
A S C I I c o d e : F F
Decimal:
Hexadecimal : 0C
Comments:
Prints the data in the print buffer and advances the paper to the
top of the next form according to the current page length. The
default page length is 66 lines, but the page length can be changed
with ESC C. In CSF mode, an FF ejects a sheet, but will not load.
13
24
12
Carriage Return
Cancel Line
Form Feed
9-13