Epson LQ-850 User Manual page 195

ESC ( -
Format :
ASCII code:
Decimal:
Hexadecimal:
Comments:
Use decimal or hexadecimal values for all variables, not ASCII
characters.
Use the following values for the first 3 variables:
m must be 1
The value of
= 1 for underline
= 2 for strikethrough
The value of cL2 determines whether the score line is single,
double, broken, or continuous:
d 2 = 5
The last three bits of d2 determine the characteristics of the score
line as shown below:
On (1)
Off (0)
Notes: If Bit 1 and Bit 0 are both off, the selected score is
cancelled. Double line and single line scores cannot be
combined at the same score position.
ESC
27 40
1B 28
determines the location of the score:
Cancel the score line selected by d1
Single continuous line
Double continuous line
Single broken line
Double broken line
Bit 2
Broken
line
Continuous
line
(
45
2D
Bit 1
Double
line on
Double
line off
Select/Cancel Score
m
Bit 0
Single
line on
Single
line off
9-29