Paper Handling - Epson LQ-670 User Manual

Paper handling

Single sheets loaded from the paper guide
The printer does not load single-sheet paper.
Cause
Continuous paper is in the
paper path.
The paper release lever is set
to the tractor position.
The platen does not rotate and the printer does not feed the
paper.
Cause
The paper on the paper guide
is positioned too far to the left
or right for the paper sensor
to detect it.
The platen rotates but the printer does not feed the paper.
Cause
The edge guides are pressed
too tightly against the paper.
The paper release lever is set
to the tractor position.
7-8
Troubleshooting
What to do
Remove the continuous paper. Set the
paper release lever to the single-sheet
position and insert a new sheet. (See
Chapter 3 for information on removing
continuous paper.)
Set the paper release lever to the
single-sheet position. (See "Setting the
paper release lever" in Chapter 3.)
What to do
Move the paper a little to the left or
right.
What to do
Reinsert the paper all the way into
the printer. Make sure that the edge
guides are not too close to the paper.
Set the paper release lever to the
single-sheet position. See "Setting the
paper release lever" in Chapter 3.