Adjusting The Tear-Off Position - Epson LQ-670 User Manual

Adjusting the tear-off position

If your paper perforation is not aligned with the tear-off edge,
you can use the micro-adjust feature to move the perforation to
the tear-off position as follows:
Make sure both Tear Off/Bin lights are flashing (the paper
1.
is at the current tear-off position). You may need to press
the Tear Off/Bin button.
Hold down the Pause button for about three seconds.
2.
The Pause light begins flashing and the printer enters
the micro-adjust mode.
3-31
Paper Handling
3