Deleting Messages; Remote Operation - Uniden DA071 User Manual

DA071 V6 Qk 5/17/02
The Answer
Machine does not
delete messages
that have not been
played to the end.
If you have
messages that have
not been played,
the Answer
Machine sounds
four beeps.
Be sure to set each
digit within 8 sec-
onds. Otherwise,
you must start over
from Step 1.
2:39 PM Page 9
After all messages have played, "End of message(s)" is announced.
To replay a message while you are listening to it, press
starts again from the beginning.
To return to a previous message hold down
message.
To play the message at a faster speed, hold down
Release button to resume play at normal speed.
To skip to the next message during playback, press
The next recorded message plays.

Deleting Messages

To delete a specific message, press
while the message is playing.
The Answer Machine beeps once while the message
is playing and deletes the current message, then plays the next.
To delete all messages, hold down
The Answer Machine announces "Erase message(s)", then sounds a long beep.

REMOTE OPERATION

Call Your Telephone From Any Remote Location Using A
Touchtone Phone
When you hear the OGM, enter your security code (915-factory default).
After the Answer Machine beeps once to verify you entered the code correctly, enter the
number(s) for the function(s) you want the Answer Machine to perform.
(Functions list on page 6)
Changing The Remote Operation Security Code
The remote operation security code is preset to 915, but you can change it by following
these steps.
set
1. Hold down until the Answer Machine beeps once.
2. Press and the security code "915" is announced, then it announces the first digit "9".
3. Repeatedly press or
The Answer Machine announces the second digit "1".
4. Press or to set the second digit, then press
5. Press or to set the third digit, then press
The Answer Machine sounds a long beep and announces the new security code.
once . The current message
until it beeps. Release button to play the
once.
delete
once
delete
when playback has finished.
to set the first digit, then press
set
.
set
.
5
set
.