Reloading During Printing - Epson LQ-1010 User Manual

Using Single
Sheets
Press the ON LINE button to set the printer on line. When the ON
6.
LINE light is lit, the printer can accept data from your computer.
You are now ready to begin printing.

Reloading During Printing

When you print a document of more than one page using single-sheet
paper, the printer stops printing when it reaches the bottom of the page.
When this happens, the ON LINE light either goes off automatically or
remains on, depending on your application program software. If the ON
LINE light remains on, the first thing you should do is press the ON LINE
button to take the printer off line.
Once the ON LINE light is off, remove the sheet that has just been
printed (if necessary, press the LOAD/EJECT button to eject the page) and
load a new sheet. Press the ON LINE button to start printing the next
page and follow any additional prompts from your software. Be sure
that the page length or form length setup in your software matches the
number of lines that can be printed on your paper.
Paper Handling
2-6