Word Processing - Epson LQ-1010 User Manual

Word Processing

ESC a
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Sets the type of justification.
The following values can be used for n:
0: Selects left justification.
1: Selects centering.
2: Selects right justification.
3: Selects full justification.
The default setting is n = 0. Full justification (n = 3) is performed
when
the buffer becomes full; HT and BS are invalid except in n = 0
mode. For n = 3 there must be no carriage returns within a
paragraph.
ESC SP (space)
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Sets the amount
addition to the space already allowed in
The number of dots is determined by n, which should be from 0 to
127. Each unit of space is 1/120th of an inch in draft mode and
1/180th of an inch in Letter Quality and proportional modes.
ESC a
27 97
1B 61
ESC SP
27 32
1B 20
of
space added to
Commands Arranged by Topic
n
n
n
Set Intercharacter Space
n
n
n
the each
right of
the
design of the character.
Command Summary
Select Justification
character, in
9-33