Installing The Ink Cartridge - Epson LQ 300 User Manual

2. Check the label on the back of the printer to make sure the
voltage required by the printer matches that of your
electrical outlet. Also, make sure that you have the correct
power cable for your power source.
Caution:
It is not possible to adjust the printer for use at another
voltage. If the rated voltage and
match, contact
the power cord.
3. If the power cord is not attached to the printer, connect it to
the AC inlet on the back of the printer.
4. Plug the power cord into a properly grounded electrical outlet.

Installing the Ink Cartridge

Warning:
The ink cartridge is a self-contained unit. Under ordinary use,
ink will not leak from the cartridge. If ink does come out, avoid
contact with skin and eyes.
them immediately with water and contact a physician. Wash
all traces of inkfiom your skin with soap and water after
handling an ink cartridge. If irritation occurs, contact a
physician.
1-8 Setting Your Printer
Up
your
dealer for assistance. Do not plug in
your
ink gets in to your eyes, flush
outlet voltage do not