Installing And Replacing The Ink Cartridge - Epson TM-S2000 Series Technical Reference Manual

Installing and Replacing the Ink Cartridge

Follow the steps below to install the ink cartridge into the product for the first time or replace it
with a new one.
 Do not open the ink cartridge until you are ready to install it.
 Do not touch the green IC chip on the side of the ink cartridge.
 Do not puncture the convex part of the bottom of the ink cartridge or remove the
 Do not remove the ink cartridge except when replacing it with a new one.
 After installing an ink cartridge, use it up within 6 months.
 Use the ink cartridge before the expiration date printed on its package and on the ink
 A used cartridge may have some ink on the convex part of the bottom of the cartridge.
 Dispose of the used ink cartridges according to the laws or regulations in your country
 To transport or store this product for a long period after once using this product, make
 When the ink cartridge is installed for the first time, the product uses ink to prepare for
 Cartridge yields vary based on such usage environment and conditions.
 To insure print quality, some ink remains in the cartridge after the Ink LED comes on.
 This printer may automatically run maintenance operations at night or when the power is
1
Turn on the product.
See "Turning On" on page
2
Open the ink cartridge cover.
See "Opening the Ink Cartridge Cover" on page
transparent film on the bottom of the ink cartridge.
cartridge itself.
Avoid touching that part to keep your hands clean.
and region.
sure the ink cartridge is installed in the product.
printing (ink charging). Make sure to use a new ink cartridge.
turned on to maintain print quality. As a result of these maintenance operations, you may
need to replace the ink cartridge. In this case, replace the ink cartridge with a new one.
58.
59.
Chapter 2 Setup
2
49