Changing The Default Settings - Epson LQ 300 User Manual

Loading position
When you want to print more lines on a page, set this feature to
3 mm. For example, with A4-size paper and the loading
position set to 8.5 mm, you can print 65 lines per page with
l/6 inch line spacing, but with the 3 mm setting you can print
66 lines. If you set the top margin in your software, that setting
is added to the default-setting value.

Changing the default settings

To change the printer's default settings, you use the control
panel buttons; the control panel lights show your selections.
Follow the steps below to make your changes:
1. Make sure the printer is turned off and paper is loaded in
the paper feeder.
2. Hold down the PAUSE button and turn on the printer to
enter the default-setting mode.
The printer loads a sheet of paper and prints a brief
summary and instructions. It instructs you to select the
language that you want messages printed in (English,
French, German, Italian, or Spanish).
2-14 Using Other Printer Functions