Back Panel Audio Connectors - Intel DH77EB Specification

S/PDIF digital audio out connector on the back panel
•
5-port analog audio input/output stack on the back panel
•
The back panel audio connectors are configurable through the audio device drivers.
The available configurable back panel audio connectors are shown in Figure 4.
NOTE
The back panel audio line out connector is designed to power headphones or amplified
speakers only. Poor audio quality occurs if passive (non-amplified) speakers are
connected to this output.
For information about
The locations of the front panel audio header and S/PDIF audio header
The signal names of the front panel audio header and S/PDIF audio header
The back panel audio connectors
Item Description
A Rear surround
B Center channel and LFE
(subwoofer)
C Line in
D Line out/front speakers
E Mic in/side surround
F S/PDIF out (optical)
Figure 4. Back Panel Audio Connectors
Product Description
Refer to
Figure 10, page 45
Section 2.2.2.1, page 47
Section 2.2.1, page 44
29