Connecting A Dvd Player With A/V Connectors - Sony KDP-57XBR2 Operating Instructions Manual

Setting Up the Projection TV
Connecting a DVD Player with A/V Connectors
Use this hookup if your DVD player does not have component video
out jacks (as shown on page 26).
An SVIDEOconnection will give a good-quality video signal, but if your DVD
player has component video, that connection (describedon page 26) will give
an even better signal.
1
2
Using audio cables, connect the DVD player's Audio OUT jacks
to the projection TV's Audio IN jacks.
Using an S VIDEO cable, connect the DVD player's S VIDEO jack
to the projection TV's S VIDEO jack.
TV
S VIDEO
cable
DVD player
LINE OUT
AUDtOR AUDIOL VIDEO S VIDEO
2
Audiocable
VHF/UHF CABLE
@ @
VIDEO IN
_ AUDIO-R(red)
AUDIO-L(white)
To switch between your projection TV,VCRand DVD
C3 Press WNIDEO to switch from one input device to another.
27