Connecting A Dvd Player With Component Video Connectors - Sony KF-42WE620 Service Manual

Connecting a DVD Player with Component
Video Connectors
DVD player
This is the preferred hookup to use if:
Your DVD player has component (Y, B-Y, R-Y) jacks.
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the DVD player's
Y, B-Y and R-Y jacks to the Y, P
TV. Use the HD/DVD IN 5 or 6 inputs.
The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled
Y, C and C
B R
2
Using audio cables, connect the DVD player's AUDIO OUT jacks to the
LCD projection TV's AUDIO IN jacks. Be sure to use the same row of
inputs that you used for the video connection (HD/DVD IN 5 or 6).
Component video cable
(not supplied)
Audio cable (not supplied)
To take advantage of the Wide Screen modes, set the TV's aspect
ratio to 16:9 on your DVD player. For details, refer to the operating
instructions supplied with your DVD player.
Installing and Connecting the LCD Projection TV
and P
B R
, or Y, P and P . If so, connect the cables to like colors.
B R
P
B
P
R
Rear of LCD
projection TV
AUDIO-R
(red)
jacks on the LCD projection
Y
AUDIO-L
(white)
41