Sony KDP-57XBR2 Operating Instructions Manual page 64

Using the Projection TV Menus
m If4:3 Default is set to
anything but Off, the Wide Mode
setting changes only for the
current channel. When you
change channels (or inputs),
Wide Mode is automatically
replaced with the 4:3 Default
setting. To retain the current
Wide Mode setting as channels
and inputs are changed, set 4:3
Default to Off.
Opiion Description ....
4:3 Default Wide Zoom Seiect to enlarge the 4:3 size picture, w_e
Select the default the upper and lower parts of the picture are
Screen Mode to condensed to fit the wide screen.
use for 4:3 sources. Normal ..... Select to return the4:3 picture to normal
mode.
Full......... Select to enlarge the 4:3 picture ..........
horizontally only, to fill the wide screen.
Zoom Se[_t to enlarge the 4:3 picture
horizontally and vertically to an equal
aspect ratio that fills the wide screen.
6fi...................
Mode setting when the channel or input is
changed.
Vertical Center Allows you to move the position of the pic_re up and
down in the window. (Available only in Wide Zoom and
Zoom modes.)
Move the joystick 4" or _, to choose a position and press
(9.
57