Sony DSS SAT-B1 Operating Instructions Manual page 56

3 Select one of the following:
To Do This ,., Do This ..,
Change the data service for the Select the data service and then
current station only select OK.
Change the data service for all Select DEFAULT (then see
stations "Changing the Default Data
Service" below).
Change the baud rate for the DSS Select BAUD (then see "Setting
receiver's wide band data port the Baud Rate" below).
Changing the Default
Data Service
Seh'ctiHg CANCEL return_ y,nl to the
previous screelz, without saving your
selections.
The titles of the data services may be
different, based on the service being
provided.
Use the Default Data Services screen to select a default data service for
all stations that provide data services.
To change the data service for all stations:
1
Select DEFAULT from the Data Services screen.
Select a default data service and then select OK.
DEFAULT DATA SERVICES
DATAI J DATA2 J DATA3 DATA 4
DATA5 DATA6 I DATA7 DATA 8
[_CANCF.L--
Setting the Baud Rate
Selecting CANCEL returns you to the
previous screen, without saving your
selections.
To set the baud rate for the DSS receiver's data port:
1
Select BAUD from the Data Services screen.
Select a baud rate for the data port and then select OK.
SET BAUD RATE
2400 4800 9600 19200
56
Chapter 5: Using the Custom Setup Menu