Setting Up Your Dss System - Sony DSS SAT-B1 Operating Instructions Manual

Digital satellite receiver
Hide thumbs Also See for DSS SAT-B1:
Table of Contents

Advertisement

Setting Up Your DSS System
Viewing Satellite Programs
1
2
Turn on the 'IV, and then set the 1V's line input to the DSS receiver.
(For example,
set the TV to channel 3 or 4, if you used an RF
connection;
or set to VIDEO1, etc., if you used an A/V connection.)
Turn on the VCR and A/V receiver, if you connected
these
components.
Then set their output
switches accordingly.
3
Turn on the DSS receiver and select a station.
Viewing Cable or
Off-Air Programs
Recording Satellite
Programs While Watching
Cable or Off-Air Programs
Note
The following instructions apply only if you connected your cable TV or
terrestrial antenna to your DSS receiver.
1
Turn off your DSS receiver, or press the TV/DSS button to set the
DSS receiver to TV mode (DSS indicator
on the front panel is off).
2
Turn on the TV and then:
If you have a cable box, turn it on and then tune the TV to the
output channel of your cable box, usually channel 3 or 4.
If you don't have a cable box, just tune your TV to the station
you want to watch.
No te
The following instructions apply only if you connected your cable TV or
terrestrial antenna to your DSS receiver.
1
Turn on the TV and then:
2
3
If you have a cable box, turn it on and then tune the TV to the
output channel of your cable box, usually channel 3 or 4.
If you don't have a cable box, tune your TV to the station you
want to watch.
Turn on the DSS receiver, and tune to the program
you want to
record. Then set the VCR to line input, and start recording,
according
to your VCR's instruction
manual.
Press the TV/DSS button to set the DSS receiver to TV (DSS
indicator
on the front panel is off).
The DSS receiver's
signal is sent to the VCR, while the off-air signal is
sent to your TV for you to watch.
Note
You cannot record one satellite program while watching another satellite
program (unless you have a second DSS receiver). When watching a program
that is protected by Macrovision, turn the VCR off to ensure a quality picture.
20
Chapter 3: Connecting
Your System

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sat-b1

Table of Contents