Troubleshooting - Sony Handycam HDR-FX7 Operating Manual
Digital hd video camera recorder
Hide thumbs
Also See for Handycam HDR-FX7:
- Operating instructions manual (131 pages) ,
- Specifications (2 pages) ,
- Service manual (117 pages)
Table of Contents
Advertisement
?_ou_S/_s#oo_#_g
Troubleshooting
If you run into ally problems
using your camcorder,
use the following
table to troubleshoot
the
problem.
If the problem
persists,
disconnect
the power
source
and contact
your Sony
dealer.
• Power
sources//LCD
screen/Remote
Comrnander-.p.
92
• Cassette
tapes/"Mernory
Stick Duo"-.p.
93
• Recording...p.
94
• Playback-.p.
96
• Connecting
to TV.-p.
98
• Dubbing/Editing/Connecting
to other device>-p.
99
• Connecting
to a computer...p.
100
The power
does
not turn on or abruptly
turns
off.
• Attach a charged
battery
pack to the camcorder
(p. 18).
• Use the AC Adaptor
to connect
to a wall outlet (p. 18).
The
camcorder
does
not operate
even
when
the power
is set to on.
• Disconnect
the AC Adaptor
from the wall outlet or remove the battery pack, then reconnect
it
after about 1 minute.
• Press the RESET button
(p. 122) using a sharp-pointed
object.
The camcorder
gets warm.
• The camcorder may get warmer while you use it. This is not a malfunction.
The
CHARGE
lamp
does
not light while
the battery
pack
is being
charged.
• Slide the POWER switch
to OFF (CHG)
(p. 18).
• Attach the battery
pack to the camcorder
correctly
(p. 18).
• Connect
the power cord to the wall outlet properly.
• The battery charge is completed
(p. 18).
The
CHARGE
lamp
flashes
while
the battery
pack
is being
charged.
• Attach the battery pack to the camcorder
correctly
(p. 18). If the problem
persists,
disconnect
the AC Adaptor
from the wall outlet and contact your Sony dealer. The battery pack may be
damaged.
The
remaining
battery
time indicator
does
not indicate
the correct
time.
• Ambient
temperature
is too high or too low, or the battery
pack has not been charged
enough.
This is not a malfnnction.
• Fully charge the battery
again. If the problem
persists,
the battery
may be worn-out.
Replace
it with a new one (p. 18, 108).
• The indicated
time may not be correct
in certain circumstances.
For example,
when you open
or close the LCD panel, it takes about 1 minute to display the correct
remaining
battery time.
92
Advertisement
Table of Contents
