Camcorder - Sony Handycam HDR-FX7 Operating Manual

Changing/checking the settings in your
camcorder
You call turn on and off the display of the
time code, tape counter, and other
information on the screen.
Press the DISPLAY/BATT INFO
button [].
The screen indicators turn on (displayed)
and off (undisplayed) as you press the
button.
"_" Tip
• You can display the screen indicalors during
playback on a TV. Selecl [DISP OUTPUT],
fl_en [V-OUT/PANEL] (p. 68).
You can check the setup value of the
following items.
• Audio setup such as [DV AUDIO MIX] (p. 64)
• Output signal setup ([VCR HDV/DV], etc.)
(p. 69)
• Functions assigned to the ASSIGN buttons
(p. 42)
• Camera setup. (p. 59)
• Picture profile (p. 39)
1
Press the STATUS CHECK button
[].
2
Turn the SEL/PUSH EXEC dial []
to display the desired item.
When the POWER switch is set to
CAMERA, the items appear in the
following order:
AUDIO ---+OUTPUT ---+ASSIGN ---+
CAMERA ---+PICT.PROFILE
When the POWER switch is set to
VCR, the items appear in the following
order:
AUDIO ---+OUTPUT ---+ ASSIGN
0 Note
• When [PICT.PROF1LE] is set to [OFF], the
settings of PICTURE PROFILE are not
displayed.
g
m
Toturnoff thesetup value
• Press the STATUS CHECK button [_.
Continued,_
47