Messages - Sony MHC-GS100 Operating Instructions Manual

Problems and remedies (continued)
If other troubles not described above
occur, reset the system as follows:
1
Unplug the power cord.
2 Plug the power cord back in.
3 Press I/(_ to turn on the system.
4
Press STOP m, CLEAR, and DISPLAY at
the same time.
The system is reset lo the faclory settings.
All
the settings you made are cleared. Be sure lo
restore all necessary seltings.
One of the fbllowing messages may appear or
llash in the display during operation.
NO DISC
• There is no CD in the disc slol.
OVER
• You have reached the end of'the CD.
STEP PULL
• You tried to program 26 or more tracks (steps).
On operating voltage
Be|bre operating the system, check that the operating
voltage of your system is identical with the voltage of
your local power supply.
On safety
• Unplug the system from the wall outlet (mains) if it
is no1 to be used fbr an extended period of time. To
disconnect the cord (mains lead), pull it out by the
plug. Never pull the cord itself]
• Should any solid object or liquid f_ll into lhe
component, unplug the system and have it checked
by qualified personnel before operating it any
further.
On placement
• Do no_ place the system in an inclined position.
• Do not place the system in locations where it is:
Extremely hol or cold
Dusly or dirty
Very humid
Sut'_ject to vibrations
Subject to direct sunfight.
• Use caution when placing the unit or speakers on
surPaces that have been specially trea_ed (with wax,
oil, polish, etc.) as staining or discoloration of the
surPace may result.
On heat buildup
• Although the unit fieals up during operation, this is
not a malihncfion.
• Place the unit in a location witfi adequate
ventilation to prevent he_t buildup in the unit.
If you continuously use this unit at a large volume,
the cabinet temperalure of the top, side and bottom
rises considerably. To avoid burning yourself, do not
touch the cabinel.
To prcvent a malfunction, do not cover the ventilation
hole for the cooling fi_n.
28 Us