Manual Tuning - Sony MHC-GS100 Operating Instructions Manual

Setting presets through
manual tuning
1
Press TUNER/BAND repeatedly to
select "FM" or "AM".
2 Press TUNING - or + repeatedly to tune
in the desired station.
3 Press MENU.
4
Press PRESET- or + repeatedly until
"MEMORY" appears, then press
ENTER.
A preset number appears.
5 Press PRESET - or + repeatedly to
select the desired preset number.
6 Press ENTER.
7 Repeat steps 1 to 6 to store other
stations.
Other Operations
TO Do this
Tmle in a station Follow the procedure described in
with a weak "Selling presets through manual
signal tuning".
Stop setting Press MENU.
presets
Change the Start over from step 1.
preset station
To change the AM tuning interval
The AM tuning interval is factory-set to 9 kliz
(I0 kHz in some areas). To change the AM
tuning interval, tune in any AM station first,
then turn offlhe system. While holding down
ENTER, turn 1he system back on. When you
change the interval, all the AM preset stations
are erased. To reset _he interval, repeat lhe
same procedure.
Note
You cannot change the AM tuning interval in
Power Saving Mode.
Tips
• The preset slations are retained |br about a duy even
if you disconnect the mains lead or ira power
rid|lure occurs.
• You cm_ label the preset slations (see page 16).
• To improve broadcast reception, reorient or move
the supplied antennas near a window or outdoors.
-1
15 us