Sony DPP-EX5 Operating Instructions Manual page 70

, i
Using your printer with Macintosh computers
Uninstalling the printer driver
When the software becomes unnecessary, remove the software as follows:
1
Disconnect the USB cable from your printer and the computer.
2 Open "Print Center", select "DPP-EX5" from the printer list and
then click "Delete".
m
The "Print Center" is located in the "Utilities" folder of the "Application" folder.
70 GB
You can use an application software to print images stored in your computer
with the Digital Photo Printer DPP-EX5.
m
• Before printing, make sure to connect the USB connectors of the printer and the
computer. If you connect it after you start printing, the printer or the computer
may not work properly.
• This section explains the settings and operations with a typical application as an
example. Depending on the application, print settings and operations may diffor.
For the details, refer to the manual of your application.
• The dialog boxes in this section are those in Mac OS X (v10.2). They may diffor
depending on the operation system.
• To obtain the expected print performances, we suggest you use an application
software that allows you to check the print preview. Use the application software to
make the image size to 1644 x 2466 (dots) for the Post Card (4 x 6 inch) size, 1464 x
2064 (dots) for the 3.5 x 5 inch size, and 1137 x 1516 (dots) for the Small (3.5 x 4 inch)
size. Also make the resolution to 403 dpi. Even after thee adjustments, an image
may be cut off or proper printed performances may not be obtained depending on
the application software you use. If this occurs, adjust the image size smaller.
1
2
Connect the printer to your computer and turn on the printer.
In a while, the printer is detected and ready for printing. When the printer
is ready, the "DPP-EX5" is displayed in the printer list of the "Print
Center".
Start the application software that you use for printing, and
select the image to be printed.
When using Mac OS 9.x
Open "Chooser" from the Apple menu, click "DPP-EX5", and then close
the "Chooser".