Sony DPP-EX5 Operating Instructions Manual page 51

Item
Clock Setting
Settings
You can set the internal clock to record the date you saved
the image in the "Memory Stick".
1 Press the arrow (t_/,I,) button to select "Clock Setting"
and press ENTER.
The printer enters clock setting mode. The cursor
appears on the month (for NTSC) or the day (for PAL).
2 Press the arrow (t_/,I,) button to set the month or day.
Press 4t to increase the number.
Press ,I, to decrease the number.
3 Press * or ENTER.
The cursor moves to the day (for NTSC) or the month
(for PAL).
4 Repeat steps 2 and 3 to set all of the items: month or day,
year, hour and minute.
If you want to set the previous item, press _,. The hour is
displayed in 24-hour system.
5 To release the clock setting mode, press ENTER or press
_- to move the cursor to "Clock Setting".
When you press tt to move the cursor to the MENU bar,
the clock starts working.
If you unplug the AC power cord, the clock setting will become
invalid within a few hours. In this case, please set the clock again.
o-
<
o_
9
&
u_
o
0
o
Press the arrow (_/_,/_,/,_) button to select "EXIT" and press
ENTER.
The settings take effect until you change them even after you turn off the
power. The previous screen is displayed.
To cancel settings
Press CANCEL. The settings done are canceled and the screen returns to the
one displayed before you entered the MENU. The settings will not be saved
until you select "EXIT" and press ENTER.
51 G8