Sony DPP-EX5 Operating Instructions Manual page 60

Using your printer with Windows computers
Uninstalling the software
When the software becomes unnecessary, remove the software from your
computer's hard disk as follows:
1
Disconnect the USB cable from your printer and the computer.
2 Open the "Printers and Faxes" (Windows XP Home Edition/XP
Professional only) or "Printers" from the "Control Panel".
3 Right-click on "Sony DPP-EX5" in the "Printers and Faxes" or
"Printers" window and select "Delete" from the short-cut
menu.
The confirmation dialog box is displayed.
4
Click "Yes".
The relevant
files are
removed from yollr computer's hard disk.
You can use the "Print "command of an application software to print an image
from your computer with the Digital Photo Printer DPP-EX5.
When using the Windows XP Home Edition/Professional, you can use My
Pictures to print an image (page 63).
m
• Before printing, make sure to connect the USB connectors of the printer and the
computer. If you connect it after you start printing, the printer or the computer
may not work properly.
• This section explains the settings and operations with a typical application as an
example. Depending on the application, print settings and operations may differ.
For the details, refer to the manual of your application.
• The dialog boxes in this section are those in Windows XP Professional. Thoy may
differ depending on the operation system.
• To obtain the expected print performances, we suggest you use an application
software that allows you to check the print preview. Use the application software to
make the image size to 1644 x 2466 (dots) for the Post Card (4 x 6 inch) size, 1464 x
2064 (dots) for the 3.5 x 5 inch size, and 1137 x 1516 (dots) for the Small (3.5 x 4 inch)
size. Also make the resolution to 403 dpi. Even after these adjustments, an image
may be cut off or proper printed performances may not be obtained depending on
the application software you use. If this occurs, adjust the imago size smaller.
60 GB