Sony CMT-DV2D Operating Instructions Manual page 11

Use buttons on Ihe remote lk)r the operation.
1
Press I/@ to turn on the system.
Press CLOCK/TIMER SET.
2
3
4
5
6
Press F_ or _ repeatedly to set the
hour.
Press ENTER.
Press _ or DH_ repeatedly to set the
minute.
Press ENTER.
The clock starts working.
To adjust the clock
1
Press CLOCK/TIMER SET.
2 Press _ or _ to select "CLOCK SET",
then press ENTER.
3 Do the same procedures as step 3 to 6
above.
Notes
• The clock settings arc, canceled when you disconnect
the power cord or if a power fnilure occurs.
• You cannot set the clock in Power Saving Mode
(page 34).
You can change the on-screen display language.
1
Turn on your TV and select the video
input.
2 Press I/@ to turn on the system.
3 Press DVD _ (or DVD 1=,_11on the
unit) to switch the function to DVD.
4
Press • to stop playback.
5 Press DVD SETUP in stop mode.
6 Press 4,= or =d_ repeatedly to select
"Language", then press ENTER.
7 Press t or _ repeatedly to select
"OSD", then press ENTER.
8 Press t or _ repeatedly to select a
language from the displayed list, then
press ENTER.
9 Press DVD SETUP to turn off the Setup
Display.
Note
Pressing DVD SETUP in step 5 does not _ork when
using a JPEG disc. Eijectthe disc belbre making the
setting.
if)
11 GB