Sony KDF-37H1000 Operating Instructions Manual page 31

Surround
Sound Booster
Steady Sound
Volume Offset
S-FORCE Front Provides a virtual surround sound experience made possible using just
Surround
two front speakers.
Off Select for normal stereo or mono reception.
The Sound Booster provides a fuller sound with a greater sense of depth and width, by
emphasizing the High and Low frequency sounds. Select High or Low for the amount of
boost you desire while in the
Custom Sound Mode.
Selecting Off will bypass the
emphasis.
• The Sound Booster is automatically in the High position for
Dynamic
Sound
Mode and Low position for Standard Sound Mode.
On
Stabilizes tile volunle across all programs and connnercials.
Off Turns off Steady Sound.
Adjusts tile volume level of tile current input (TV or video input) relatbe to other inputs.
Wide Mode Wide Zoom Fills the screen with minimum distortion.
Normal Displays the 4:3 pictnre in its original size when the original somve is 4:3.
• Normal it not available when you are watching 720p, 1080i or 1080p sources.
Full Enlarges the picture horizontally to fill the screen when the original
source is 4:3 (Standard-definition source). When the original source is
16:9 (High-definition source), select this mode to display the 16:9
picture in its original size.
Zoom Enlarges the original picture while maintaining the aspect ratio.
• Wide Mode can also be accessed by pressing the WIDE button.
Auto Wide On Automatically changes Wide Mode setting based upon content.
If frequent screen changes are disturbing to you, select Off.
Off Tnrns off the Auto Wide option. Choose a Wide Mode from the
Wide Mode option.
4:3 Default Wide Zoom
Enlarges the 4:3 picture to fill the 1(,:9 screen, keeping the original
Select the d@mlt semen image as nmch as possible.
mode to usejor 4:3
Normal
Displays the 4:3 picture in its original size.
,_'OUFCU,_'
Full
Select to enlarge the 4:3 picture horizontally only, to fill the display area.
Zoom Select to enlarge the picture horizontally and vertically while
maintaining the aspect ratio that fills the wide screen.
Off
Select to continue using the current screen mode setting when the
channel or input is changed.
• This option is not available for HDMI PC input.
• This option is not available if Auto Wide is set to Off.
• If4:3 Default is set to anything but Off, the Wide Mode setting changes only for the
current channel. When you change channels (or inputs), Wide Mode is automatically
replaced with the 4:3 Default setting for 4:3 sources. To retain the current Wide Mode
setting as channels and inputs are changed, set 4:3 Default to Off.
(Continued)
31