Sylvania 6842THG Owner's Manual page 6

INCTIONS
SLEEP button (p23)
To turn the power off automatically at
preset time.
POWER button (p13)
To turn TV on/off.
Channel number buttons (p18)
To select channels.
SETUP button (p15)
To display on-screen menu.
_l_/,&/vf buttons (p13)
To move left / right / up / down through
the items.
ENTER button (p13)
To decide the command of setting when
the menu is displayed.
BACK button (p22)
Togo backto the previous operation in menu.
VOL. AJV buttons (p18)
To adjust volume.
MUTE button (p18)
To mute sound.
CH RETURN button (p18)
To return to previously viewed channel.
SELECT button (p20)
To select TV or external input mode (to
access DVD, VCR, etc.).
(pie)
,' Analog mode (TV)
To select audio mode.
,, Digital mode (DTV)
To select audio language.
- STILL button (p19)
Pauses the image shown on the screen.
MODE button (p21)
Selects aspect ratios available for the
screen.
button
,,Analog mode (TV) (p22)
To display channel No., signal type
and TV setting.
,, Digital mode (DTV) (p22)
To display channel information, signal
type and TV setting.
,, External mode (p20)
To display external mode, signal type
and TV setting.
_bdY buttons (p18/p20)
To select channels and external input
mode.
iNPUT SELECT/ENTER
button (p20/p13)
, To select TV or external input
mode (to access DVD, VCR,
etc.).
,,To decide the command of
setting when the menu is dis-
played.
CHANNEL A,/T buttons (p18)
To select channels and move
up/down through the menu items.
VOLUME A/V buttons (p18)
To adjust volume and move
right(A)/left(V) through the
menu items.
infrared Sensor Window
To receive the infrared rays
transmitted from the remote
control.
STANDBY indicator
Lights up when the power is in
the standby mode. Disappears
when the power is ON.
ON indicator
Lights up when the power is ON.
POWER button
To turn TV on/off.
SETUP button (p15)
To display on-screen menu.
NOTE:
With buttons [VOL, _./_] or [MUTE], you can only adjust the volume of the main unit. You cannot adjust the volume of the external
devices with these buttons,
About interference to infrared Devices
Please note in advance that using other infrared devices
(such as infrared cordless headphones) near the plasma
display may cause infrared interference to occur.
About Pixel Defects
A plasma display is created by using a collection of miniature
pixels. It is possible to display more than 99.99% of valid pix-
els, however a small fraction of pixels over the life of the
product may not illuminate or may constantly be illuminated.
This is not to be considered a defect in the plasma panel.
EN
Preventing Image Burn on the plasma display
Fixed images displayed on the plasma display for an
extended period of several hours may cause uneven pixel
aging causing damage to the plasma display. You should
try to avoid displaying fixed images for extended periods
on the plasma display.
Images of high luminance displayed on the plasma display
for more than 60 seconds may cause lingering images to
remain on the screen. These images will automatically disap-
pear, but may take time depending on the luminance of the
images and how long they were displayed on the screen.