Page 1
VISIT OUR WEB SITE AT http://www.SylvaniaConsumerElectronics.com 42 inch Digital / Analog PLASMA DISPLAY TV Owner’s Manual 6842THG TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA. By changing the screen display mode from time to time, you can reduce burn-in on screen.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI- ANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELEC- TRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
PRECAUTIONS • Place your TV in a room with adequate ventilation. • Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight. • Do not place your TV on soft surfaces, such as rugs or blankets. •...
SUPPLIED ACCESSORIES • Owner’s Manual (1EMN21782) • Remote control unit (NF000UD) • If you need to replace these accessories, please refer to the PART NO, with the illustrations and call our help line mentioned on the front page. • Depending on your antenna system, you may need different types of Combiners (Mixer) or Separator (Splitter).
UNCTIONS REMOTE CONTROL, FRONT AND REAR PANEL FUNCTION SLEEP button To turn the power off automatically at preset time. POWER button To turn TV on/off. Channel number buttons To select channels. SETUP button To display on-screen menu. buttons s / B / K / L To move left / right / up / down through ENTER button To decide the command of setting when...
ANT. IN jack Connect your antenna or cable box here. DIGITAL AUDIO OUT (COAXIAL) jack Connect an optional coaxial digital audio cable here through the coaxial digital audio in jack of a decoder or audio receiver. Rear of this TV VIDEO2 IN jacks Connect video AUDIO...
REPARATION FOR USE CONNECTION This section describes how to connect this TV to reception and other sources. MAKE SURE YOU HAVE AN ANTENNA. As DTV is only available over the air, you need an antenna to receive digital signal. NOTE: Be sure that antenna or cable is connected properly before plugging the power cord.
EXTERNAL CONNECTION [HDMI CONNECTION] 1) This is the best method to connect this TV to video devices with the HDMI output jack, such as DVD play- er with HDMI output jack, etc. It can minimize the deterioration of image quality. Use the HDMI cable (commercially available) for connection.
[COMPONENT CONNECTION] 1) This is a better method to connect this TV to video devices with the Component output jack, such as DVD player, etc. Use the Component cable (commercially available) for connection. If you connect component output jack to COMPONENT1 input jack, connect an audio cable to AUDIO L/R jacks of COMPONENT1.
[ANALOG AUDIO/VIDEO CONNECTION] 1) This is the general method to connect this TV to video devices with the video and audio output jacks, such as VCR, Camcorder, Video Game, etc.. When the audio jack of video devices is monaural, connect this TV to the Audio L jack. If you connect video output jack to VIDEO1 input jack, connect an audio cable to AUDIO L/R jacks of VIDEO1.
[AUDIO OUTPUT CONNECTION] 1) If you connect this TV to an external audio device, you can enjoy much more of the broadcasting pro- grams with the feeling of being at a live program. Use the Audio cable (commercially available) for connection. Stereo system Cables not included CONNECTING THE POWER CABLE...
NITIAL SETTINGS Hint: Before starting initial setup you must connect antenna. INITIAL SETTINGS This section describes the initial settings when you first turn on the power after purchase. The initial setting items are shown below. • LANGUAGE SELECTION You can select the menu language displayed on the screen among English, Spanish and French.
HANNEL SETTINGS AUTOSCAN If you switch wires (e.g. between antenna and CATV) or if you move the TV to a different area after the initial setting, you need to perform Autoscan again. This function lets you easily select the receivable channels with [CH K / L ] and the TV memorizes them even if you switch wires.
CHANNEL LIST The Channel List function lets you skip the unnec- essary channels from the Channel registration list. STILL SCREEN SETUP SETUP MODE ENTER ENTER INFO BACK Display the setup screen. • Press [SETUP]. The following setup screen is displayed. Select “CHANNEL”...
ANTENNA CONFIRMATION You can verify the signal strength of each channel to get a clearer picture. POWER SLEEP SELECT SCREEN SETUP SETUP ENTER ENTER BACK CH RETURN VOL. MUTE Display the setup screen. • Press [SETUP]. The following setup screen is displayed. Select “CHANNEL”...
LANGUAGE SELECTION You can choose your on screen language from one of the following English, Spanish or French. STILL SCREEN SETUP SETUP MODE ENTER ENTER INFO BACK CH RETURN VOL. MUTE Display the setup screen. • Press [SETUP]. The following setup screen is displayed. Select “LANGUAGE”...
ATCHING TV CHANNEL SELECTION You can select the channel by using either [CH K / L ] or Channel number buttons. How to select the channel in each way is shown below. INPUT POWER SLEEP SELECT AUDIO STILL SCREEN SETUP MODE ENTER ENTER...
STILL MODE You can freeze the image shown on the screen. AUDIO STILL STILL SCREEN SETUP MODE Pausing image. • Press [STILL], the image shown on the screen is paused. Still • The audio is not paused and keeps on reading out.
SWITCHING EXTERNAL INPUT When you connect external devices including a video cassette recorder and home audio system, you can easily switch the input mode with the remote control. POWER SLEEP SELECT SELECT SCREEN SETUP ENTER BACK CH RETURN VOL. MUTE Switch the input mode.
CHANGING THE SCREEN DISPLAY MODE Each 4 types of display mode can be selected in the screen mode in both 4:3 and 16:9 TV aspect ratio. You can select your favorite screen mode and enjoy the program. AUDIO STILL SCREEN SCREEN SETUP MODE...
SCREEN INFORMATION You can display the currently selected channel number or other information such as the audio mode on the screen for checking. SCREEN SETUP ENTER BACK BACK CH RETURN VOL. MUTE In the analog mode, the currently selected channel number and the audio mode are displayed.
SLEEP TIMER The Sleep Timer function will automatically turn off the power of the unit at a preset time. INPUT POWER SLEEP SLEEP SELECT AUDIO STILL SCREEN SETUP MODE ENTER Use Sleep Timer. • Press [SLEEP] on the remote control. •...
PICTURE ADJUSTMENT You can enjoy your favorite picture mode selecting from five picture default settings that will adjust col- ors to enhance your viewing experience. Also, the brightness, contrast, color, tint, sharpness color temperature, and energy saving settings can be changed.
CLOSED CAPTION You can view specially labeled (cc) TV programs, movies, news and prerecorded tapes, etc. with either a dialogue caption or text display added to the program. You can also change the font size and the font style by selecting by selecting options in the “Conventional CC”.
DTV CLOSED CAPTION Display the setup screen. • Press [SETUP]. The following setup screen is displayed. Select “DETAIL” and press [ENTER] to confirm. • Using [ K / L ], select “Closed Caption” and press [ENTER] to confirm. Detail Detail Closed Caption V–chip HDMI Audio...
Page 27
Set each item. • When “User Setting” is set to “On”, you can set the following items. • CC style set by “User Setting” will be displayed. • Using [ K / L ], select the item you want to set. •...
V-CHIP You can set the viewing limitations to prevent your children from watching inappropriate programs including disagreeable expression and description. The viewing limitations set for the program can be released by entering the password. POWER SLEEP SELECT SCREEN SETUP SETUP ENTER ENTER BACK...
Page 29
Set “MPAA Rating”. • Using the [ K / L ], select the rating. • Press [ENTER] and set to “View” or “Block”. V-Chip V-Chip NC-17 PG-13 BACK Select ENTER View/Block Back To exit the setup, press [SETUP]. <Selection> <Rating Category Explanations> Mature audience only NC-17 : No one under 17 admitted...
C New Password Display the “New Password” screen. • Using [ K / L ], select “New Password”. V-Chip V-Chip MPAA Rating TV Rating New Password • Press [ENTER]. Change the Password. • Use Channel number buttons on the remote control and enter the NEW 4-digit Password.
TTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY) The following is a description of the method for attaching a wall mount to the TV. When performing this operation, refer to the instruction manual included with the wall mount kit. # CAUTION •...
ISCELLANEOUS TROUBLESHOOTING GUIDE Before calling for service, check the following chart again. Symptom No power No picture or sound No color Sound OK, Picture Poor Picture Distorted Weak Picture Lines or Streaks in Picture Picture blurred Ghosts in picture Bars on screen Remedy •...
Page 33
Symptom Picture rolls vertically Different color marks on screen Poor reception on some channels Picture OK, sound poor Burn-in on screen No reception of digital signals The entered channel number changes automatically Remote control doesn’t work Problems on Closed Caption Misspelled captions are displayed.
Page 34
•IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills and other electrical appliances. •GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects.
GLOSSARY ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square);...
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at : http://www.SylvaniaConsumerElectronics.com 1EMN21782 SYLVANIA LIMITED WARRANTY FUNAI CORPORATION Customer Service Tel :1-800-605-8453...
Page 39
8453 O VISITE NUESTRO SÍTIO WEB EN http://www.SylvaniaConsumerElectronics.com Televisión con pantalla de plasma digital/analógica de 42 pulgadas Manual del Usuariol 6842THG PARA RECIBIR SEÑAL DIGITAL ANALÓGICA DEBE CONECTAR LA ANTENA. Si cambia el modo de visualización de pantalla de vez en cuando, puede reducir el efecto de imagen remanente en pantalla (consulte “CAMBIO DEL MODO DE...
ADVERTENCIA: PARA REDUCIR EL RIESGO DE INCENDIO O CHOQUE ELÉCTRICO, NO EXPONGA ESTE EQUIPO A LA LLUVIA O HUMEDAD. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN PRECAUCIÓN: PARA REDUCIR EL RIESGO DE CHOQUE ELÉCTRICO, NO RETIRE LA CUBIERTA (O PARTE POSTERIOR).
Page 41
PRECAUCIONES • Coloque el TV en una habitación suficientemente ventilada. • Manténgalo alejado de fuentes de calor, como aparatos de calefacción, o de la acción directa del sol. • No coloque el TV sobre superficies blandas, como alfombrillas o mantas. •...
ACCESORIOS SUMINISTRADOS • Manual del Usuario (1EMN21782) • Unidad de control remoto (NF000UD) • Si necesita cambiar estos accesorios, consulte el NO. de PIEZA encima de la figura y llame a nuestra línea de asistencia mencionado en la página delantera. •...
Page 43
NDICE INSTRUCCIONES DE SEGURIDAD IMPORTANTES ......... . .2 PRECAUCIONES .
UNCIONES FUNCIONES DEL MANDO A DISTANCIA Y DEL PANEL FRONTAL Y TRASERO Botón SLEEP Para apagar automáticamente el apara- to a la hora prefijada. Botón POWER Para encender y apagar el TV. Botones de Número de canal Para seleccionar canales. Botón SETUP Para mostrar el menú...
Toma ANT. IN Conecte aquí su antena o caja de convertidor aquí. Toma DIGITAL AUDIO OUT (COAXIAL) Conecte aquí un cable coaxial audio digital opcional a través de la toma de entrada coaxial audio digital de un descodifi- cador o receptor de audio. Parte trasera del TV Tomas VIDEO2 IN Conecte el cable de...
REPARACIÓN PARA EL USO CONEXIÓN En esta sección se describe cómo hay que conectar este TV a fuentes receptoras y otras. ASEGÚRESE DE TENER UNA ANTENA. Como el DTV sólo existe en ondas aéreas, necesita una antena para recibir señal digital. NOTA: Asegúrese de que la antena o el cable están correctamente conectados antes de enchufar el cable de la corriente.
CONEXIÓN EXTERNA [CONEXIÓN HDMI] 1) Éste es el mejor método para conectar este TV a dispositivos de vídeo con la toma de salida HDMI, tales como un reproductor de DVD con toma de salida HDMI, etc. Puede minimizar el deterioro de la calidad de imagen.
[CONEXIÓN DE COMPONENTE] 1) Éste es un mejor método para conectar este TV a dispositivos de vídeo con la toma de salida de compo- nente, tales como un reproductor de DVD, etc. Para la conexión utilice el cable del componente (comercialmente disponible). Si conecta la toma de salida componente a la toma de entrada COMPONENT1, conecte un cable de audio a las tomas AUDIO L/R (izquierda/derecha) de COMPONENT1.
[CONEXIÓN AUDIO/VIDEO ANALÓGICA] 1) Este es el método general para conectar el TV a aparatos de vídeo, como por ejemplo una videograbadora, mediante las tomas de salida de audio y vídeo. Cuando el conector audio de los equipos de vídeo sea monoaural, conecte el TV a la clavija Audio L. Si conecta la toma de salida video a la toma de entrada VIDEO1, conecte un cable de audio a las tomas AUDIO L/R (izquierda/derecha) de VIDEO1.
[CONEXIÓN DE SALIDA DE AUDIO] 1) Si conecta este TV a el dispositivo de audio externos, podrá disfrutar mucho más de los programas de radiotelevisión con la sensación de estar presenciando un programa en directo. Utilice el cable de audio (disponible en el mercado) para la conexión. Stereo system No se incluyen los cables CONEXIÓN DEL CABLE DE ALIMENTACIÓN...
REAJUSTES INICIAL Sugerencia: Antes de iniciar el ajuste inicial, debe conectar la antena. PREAJUSTES INICIAL En esta sección se describen los ajustes iniciales cuando se enciende por primera vez el equipo tras su compra. Más abajo se muestran los elementos de dichos ajustes. •...
JSUTE DE LOS CANALES AUTOSCAN Si cambia de cables (por ej., de cable de antena al cable CATV) o si mueve el TV a un área diferente después de completar el ajuste inicial, deberá realizar de nuevo Autoscan (exploración automáti- ca).
LISTA DE CANALES La función de lista de canales le permite omitir los canales innecesarios de la lista de registro de canales. STILL SCREEN SETUP SETUP MODE ENTER ENTER INFO BACK Visualización de la pantalla de instalación. • Presione [SETUP]. Se visualizará...
CONFIRMACIÓN DE ANTENA Puede verificar la intensidad de señal de cada canal para obtener una imagen más clara. POWER SLEEP SELECT SCREEN SETUP SETUP ENTER ENTER BACK CH RETURN VOL. MUTE Visualización de la pantalla de instalación. • Presione [SETUP]. Se visualizará...
SELECCIÓN DE IDIOMA Puede elegir su idioma de pantalla entre los sigu- ientes Inglés, Español o Francés. STILL SCREEN SETUP SETUP MODE ENTER ENTER INFO BACK CH RETURN VOL. MUTE Visualización de la pantalla de instalación. • Presione [SETUP]. Se mostrará la siguiente pantalla de instalación. Selección de "IDIOMA"...
ARA MIRAR TV SELECCIÓN DE CANAL Puede seleccionar el canal usando bien [CH K/L] o los botones de Número de canal. A continuación se muestran los dos modos de hacerlo. POWER SLEEP SELECT SCREEN SETUP ENTER ENTER BACK CH RETURN CH RETURN VOL.
MODO DE IMAGEN FIJA Puede congelar la imagen mostrada en la pantalla. AUDIO STILL STILL SCREEN SETUP MODE Para poner en pausa la imagen. • Presione [STILL], y la imagen mostrada en la pantalla se pone en pausa. Imagen Fija •...
SELECCIÓN DE LA ENTRADA EXTERNA Si se conectan equipos externos, incluyendo grabadores de vídeo y sistemas de cine en casa, se podrá seleccionar fácilmente el modo de entra- da con el mando a distancia. POWER SLEEP SELECT SELECT SCREEN SETUP ENTER BACK CH RETURN...
CAMBIO DEL MODO DE VISUALIZACIÓN DE PANTALLA Cada uno de los 4 tipos de modo de visualización se puede seleccionar en el modo de pantalla, con las relaciones de aspecto del televisor 4:3 y 16:9. Puede seleccionar su modo de pantalla favorito y disfrutar de los programas.
INFORMACIÓN DE PANTALLA Con esta función se puede visualizar en la pantalla el número de canal seleccionado u otra información como el modo de audio para su comprobación. SCREEN SETUP ENTER BACK BACK CH RETURN VOL. MUTE En el modo analógico, se muestra el número de canal seleccionado y el modo de audio.
TEMPORIZADOR DE APAGADO AUTOMÁTICO La función Temporizador de Apagado Automático apagará automáticamente la corriente de la unidad a una hora determinada. INPUT POWER SLEEP SLEEP SELECT AUDIO STILL SCREEN SETUP MODE ENTER Uso del Temporizador de Apagado Automático. • Presione [SLEEP] del mando a distancia. •...
AJUSTE DE LA IMAGEN Puede disfrutar de su modo de imagen preferido seleccionando entre las cinco configuraciones predeterminadas de imagen que ajustarán los colores para mejorar su experiencia de visión. Además, pueden variarse los ajustes de brillo, contraste, color, matiz, nitidez, temperatura de color y ahorro eléctrico.
SUBTÍTULOS Podrá ver películas, noticias, programas de TV, etc. especialmente identificados (cc) ya sea con subtí- tulos del diálogo o con visualización de texto agre- gados al programa. También puede cambiar el tamaño y el estilo de la fuente seleccionando opciones en “S.C. Convencional”.
SUBTÍTULOS DE DTV Visualización de la pantalla de instalación. • Presione [SETUP]. Se visualizará la siguiente pantalla de instalación. Seleccione "DETALLE" y presione [ENTER] para confirmar su selección. • Mediante [ K / L ], seleccione "Subtítulo Cerrado" y presione [ENTER] para confirmar su selección. Detalle Detalle Subtítulo Cerrado...
Page 65
Ajuste cada elemento. • Cuando "Config. Usuarid" esté ajustado en "On", puede ajustar los elementos siguientes. • Aparece el estilo S.C. ajustado en “Config. Usuarid”. • Con [ K / L ], seleccione el elemento que desee ajustar. • Puede cambiar la configuración de cada uno de los elementos con [ K / L ].
V-CHIP Permite que los padres eviten que sus niños vean programas de televisión que contienen material inapropiado, incluyendo expresiones y descrip- ciones desagradables. Se pueden cancelar las lim- itaciones de programas establecidas introduciendo la contraseña. POWER SLEEP SELECT SCREEN SETUP SETUP ENTER ENTER...
Page 67
Ajuste de "Clase de MPAA". • Con [ K / L ], seleccione la clase. • Presione [ENTER] y ajuste "Mirar" o "Bloq.". V-Chip V-Chip NC-17 PG-13 BACK Seleccionar Mirar / Bloque Atrás ENTER Para salir del instalación, presione [SETUP]. <Selección>...
C Contraseña Nueva Visualización de la pantalla "Contraseña Nueva". • Con [ K / L ], seleccione "Contraseña Nueva". V-Chip V-Chip Clase de MPAA Clase de TV Contraseña Nueva • Presione [ENTER]. Cambie la contraseña. • Use los botones de Número de canal del mando a distancia e introduzca la NUEVA con- traseña de 4 dígitos.
NSTALACIÓN DE UN SOPORTE PARA LA MONTAJE EN PARED (SE VENDE POR SEPARADO) A continuación se ofrece una descripción del método para instalar un soporte para la montaje en pared a este TV. Al realizar esta operación, consulte el manual de instrucciones incluido con el juego de montaje en pared. # PRECAUCIÓN •...
ARIOS GUÍA DE LOCALIZACIÓN DE PROBLEMAS Antes de llamar al servicio técnico, compruebe una vez más el siguiente cuadro. Síntoma No hay corriente No hay imagen o sonido No hay color El sonido es correcto, la imagen es deficiente Imagen distorsionada Imagen débil Líneas o rayas en la imagen Imagen borrosa...
Page 71
Síntoma La imagen se desplaza vertical- mente Marcas de otro color en la pantalla Recepción defectuosa de algunos canales La imagen es correcta, el sonido es deficiente Imagen remanente en pantalla No se reciben señales digitales El número de canal introducido cambia automáticamente El mando a distancia no funciona Problemas con los Subtítulos...
Page 72
•RUIDO DE IGNICIÓN: •IMÁGENES FANTASMAS: •NIEVE: •INTERFERENCIA DE FRECUENCIA DE RADIO: •PREVENCIÓN DE UN OBSTÁCULO PARA RECEPTORES DE RADIO: Aparecen barras •El panel de visualización de plasma enciende los fósforos mediante la verticales, según el contenido de la pantalla. Pueden aparecer puntos negros o rayas horizontales, la imagen puede fluctuar o desplazarse.
GLOSARIO Ancho buzón El ancho buzón se refiere al formato que muestra una imagen alargada en la pantalla de televisión con una proporción estándar 4:3 y con espacios en negro por su parte superior e inferior. Se usa para mantener la proporción de la fuente original, como puede ser una película de cine (16:9 o más ancho).
SPECIFICACIONES ESPECIFICACIONES GENERALES Sistema de televisión: ATSC NTSC-M TV estándar Sistema de Subtítulos narrativos: §15.119/FCC (CC analógica) §15.119/FCC (CC digital) Gama de canales (ATSC/NTSC) VHF: 2 ~ 13 UHF: 14 ~ 69 CATV: 2 ~ 13, A ~ W, W+1 ~ W+94, A-5 ~ A-1, 5A Sistema de sintonización: Sistema de sintonización sintetizada de frecuencia de...
Para localizar su CENTRO DE SERVICIO AUTORIZADO más cercano o para preguntas generales de servicio, por favor ponte en contacto con nosotros a : http://www.SylvaniaConsumerElectronics.com 19900 Van Ness Avenue, Torrance, CA 90501 SYLVANIA GARANTIA LIMITADA FUNAI CORPORATION Servicio al Cliente...
Page 77
SIMPLE SET UP GUIDE GUÍA DE INSTALACIÓN RÁPIDA Some cables here are not included with the plasma display TV. Algunos de los cables mostrados no se incluyen con el televisor de pantalla de plasma. CAMCORDER VIDEOCÀMARA AUDIO VIDEO2 S-VIDEO2 HDMI ANT.
AMPLIFIER/RECEIVER AMPLIFICADOR/RECEPTOR DVD PLAYER REPRODUCTOR DE DVD VIDEOGRABADOR DVD PLAYER REPRODUCTOR DE DVD 1. Owner’s Manual 2. http://www.SylvaniaConsumerElectronics.com 3. 1-800-605-8453 Printed in Malaysia AU D I O I N V I D E O AU X DIGITAL AUDIO OUT (COAXIAL) C O M P O N E N T AU D I O V I D E O...