Sylvania 6842THG Owner's Manual page 20

When you connect external devices including a
video cassette recorder and home audio system,
you can easily switch the input mode with the
remote control.
_ptrr
_;_ , SELECT
ii@ @ @!i
1 Switch the input mode.
"When you press [INPUT SELECT] or [OH
A/T] on the remote control, the input mode will
be switched as below.
TV/DTV channel
Video|
Video2
Component1
Component2
HDMI
======_
,,To use the VIDEO1 or S-VIDEO1 INPUT jack on
the TV, select "Video1".
,,To use the VIDEO2 or S-VIDEO2 INPUT jack on
the TV, select "Video2".
,,To use the COMPONENT1 INPUT jacks on the
TV, select "Component1 ".
,,To use the COMPONENT2 INPUT jacks on the
TV, select "Component2".
,,To use the HDMI INPUT jack on the TV,
select "HDMr'.
• When you press [INFO], the current external
input mode, the type of resolutions for video
signal, TV aspect ratio CC and TV rating will be
displayed at the top-right of the screen.
1) When using VIDEO1 or S-VIDEO1 INPUT jack
2) When using VIDEO2 or S-VIDEO2 INPUT jack
3) When using COMPONENT1 INPUT jacks
4) When using COMPONENT2 INPUT jacks
5) When using HDMI INPUT jack
• The information display will automatically dis-
appear in one minute.
EN