Audio Mode - Sylvania LD320SS8 Owner's Manual

To Cancel the Sleep Timer
Press [SLEEP] repeatedly until "Sleep Off" is displayed
on the TV screen.
Note:
• The sleep timer setting display will automatically
disappear in 4 seconds.
• When you disconnect the unit from the AC outlet or when
a power failure occurs, the sleep timer setting will be
canceled.
[] Switching Each Mode
Youcaneasilyswitch with the remotecontrol t o the DTV(ATS()andTV
(NTS()orto access an external device when they are connected to the unit,
Press [INPUT SELECT] or [CH A] repeatedly to cycle
through the input modes.
TV/DTV channel
¢
or
.____.J
• Pressing [CH V] reverses the direction of the mode.
• To use the video or S-video input jack of VIDEO 1 on
the unit, select "Video1 ".
• To use the video or S-video input jack of VIDEO 2 on
the unit, select"Video2".
• To use the component video input jack of
COMPONENT 1 on the unit, select "Component1".
• To use the component video input jack of
COMPONENT 2 on the unit, select'Component2".
• To use the HDMI l-IN jack on the unit, select "HDMII".
• To use the HDMI 2-IN jack on the unit, select "HDMI2".
• To use the PC-IN jack on the unit, select "PC".
[] Switching Audio Mode
Thissection describes h owto switch the audio language.
Press [AUDIO] to display the currently selected
audio mode.While receiving an MTS broadcast,
press repeatedly to cycle through the available audio
channel.
At_D_O
When all audio are available
When stereo and monaural audio are available
When SAP and monaural audio are available
When only monaural audio is available
(Cannot be switched)
STEREO: Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
• The current mode will automatically disappear in 4
seconds.
Press [AUDIO] to display the currently selected
language and the number of available languages.
i\i.iil}_{}
2 Press [AUDIO] repeatedly to cycle through the
available audio languages.
• Available languages differ depending on the
broadcast. "Other" is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.
• The current mode will automatically disappear in 4
seconds.
Note:
• Pressing[AUDIO] does not control external audio device.
EN