Sylvania 6432GG Owner's Manual page 16

_QLUME ADdUSTM
This section describes how to adiust the volume
when viewing TV. The MUTE function, wMch is use-
ful when you have a vJslor or a phone call, wJl be
also described.
CP_
0000
,VOL A/V
MUTE
1 Using [VOL AFT]
• You can adjust the audio volume with [VOL z2_7].
• The volume bar is displayed at the bottom of
the screen when adjusting the volume.
• Same operation is availabJe with [VOL AFT] on
the front panM of the main unit.
VCLUMf
IIIIIIIIIIIIIIII
2
Ush_g [MUTE]
• Press [MUTE] on the remote contrM to mute
the sound.
The colored volume bar is displayed on the
screen while muting.
This section describes how to swtch the audio in
the analog mode and how to swtch the audio lan-
guage in the digital mode.
Switch the audio.
• Every time you press [AUDIO], the audio will
be switched as below,
IN]
e]
[L_ N°]
MAIN :Outputs main-audio
SAP : Outputs second audio channel
MONO : Outputs mono-audio
Switch the audio language,
• When you press [AUDIO], the currently selected
language and the number of received languages
will be displayed on the scleen.
Audio
v(iuMf
IIIIIIIIIIIIIIII
• To release the MUTE status, press [MUTE]
again or press [VOL AFT].
• Every time you press [AUDIO], the language
will be switched.
Languages you can switch differ depending
on the receiving broadcast.
NOTE:
E/en ff you ptoss [AUDIO] In oxtema] inpuL th÷ audio w#] no_
_ _l[ch÷d
EN