Location; Avoid The Hazards Of Electrical Shock And Fire; Warning; Symbols Used In This Manual - Sylvania SRTD420 Owner's Manual

20 inch color tv/dvd
Hide thumbs Also See for SRTD420:
Table of Contents

Advertisement

For safe operation and satisfactory performance of
your TV/DVD, keep the following in mind when
selecting a place for its installation:
* Shield it _om direct sunlight and keep it away from
sources of intense heat.
* Avoid dusty or humid places.
* Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top and bottom of the unit. Do not place the unit
on a carpet because this will block the ventilation
holes.
* Install unit in a horizontal position.
* Avoid locations subject to strong vibration.
* Do not place the TV/DVD near strong magmetic fields.
* Avoid moving TV/DVD to locations where temper-
ature differences are extreme.
The following symbols below appear in some head-
ings and notes in this manual, with the following
meanings
: Description refers to TV operation (in the TV mode).
: Description refers to playback of DVD video discs
(in the DVD mode).
: Description refers to playback of audio CDs
(in the DVD mode).
: Description refers to playback of MP3 discs
(in the DVD mode).
: Description refers to the items to be set by the
QUICK mode (in the DVD mode).
* Do not handle the power cord with wet hands.
* Do not pull on the power cord when disconnecting
it f}om an AC wall outlet. Grasp it by the plug.
* I_;by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to an
Authorized Service Center for servicing.
* Do not put your fingers or objects into the
TV/DVD disc loading tray.
* Do not place anything directly on top of the unit.
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a TV/DVD
which has moisture, it may damage the DVD and
TV/DVD. Therefore when the condensation occurs
inside the unit, mm POWER on and allow at least 2
hours for the unit to dry out.
5
EN
0c28

Advertisement

Table of Contents
loading

Table of Contents