Table of Contents
Advertisement
To use this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround %rmat, the TV/DVD can
outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up
to a receiver with Dolby Digital decoder, you can enjoy high-quality surround sound as enjoyed in movie the-
aters.
Use audio coaxial digital cables available at retail stores for the audio connections.
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
[Fig. 71
NOTES:
* Be sure to turn off the power to all components in the system before connecting another component.
* Refer to the Owner's Manuals t\_r the components to be connected to the TV/DVD.
* If connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to ON t\_r audio output in the
setup mode. (See page 28 to set DOLBY DIGITAL to ON.)
* Unless connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output
in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also
damage the speakers.
* Only DVD audio is available using the digital audio out jack.
Manufactured under license from Dolby Laboratories I "Dolby'
and the double_D sYmbol are
trademarks of Dolby Laboratories.
12
EN
0C28
Advertisement
Table of Contents
