Advertisement
In the basic configuration,
Gemini switchboards are com-
posed of boxes in six different
sizes ranging from 335x400x210
mm to 840x1005x360 mm
(WxHxD, external measure-
ments) and with opaque or
transparent doors.
In both versions, the doors are
reversible and clip onto the
hinges without the need to use
No tools are needed for installation. The doors hook onto the hinges with special
hinge pins and are reversible.
ABB
Order codes
Basic configurations
tools; the fact that they open at
an angle of more than 180°
means that it is easy to work on
the components installed inside
the switchboard. The seal ap-
plied by extrusion along the
sides of the doors guarantees
IP66 degree of protection. Ac-
cess to the inside of the switch-
board is protected by a stan-
dard double bit lock that can be
replaced by locks of another
type available in the accesso-
ries.
Boxes and doors can be re-
quested either separately or as
combined "box + door" codes,
to make filling out the order form
more flexible.
Inside the packages, the door
is always wrapped separately
and inserted inside a pocket
FOTO NUOVA
The special structure of the inner perimeter of the box ensures further protection
against the penetration of water. The box is supplied with a spirit level.
that protects it from accidental
damage until wiring is com-
pleted and the switchboard is
installed.
Hole-cover plugs to guarantee
IP protection and double insu-
lation for wall mounting are also
supplied with the pack together
with the instruction sheet.
Gemini doors open at an angle of
more than 180° giving easy access to
the devices installed inside the
switchboard.
6
2
Advertisement
