Paper Handling - Epson Stylus Color 850 User Manual

Paper handling

Paper does not feed properly from the sheet feeder.
Cause
Too many sheets are loaded
in the sheet feeder.
The edge guides are not set
correctly.
Paper is jammed in the paper
path.
The paper stack does not fit
under the edge guide tab
inside the left edge guide.
The paper is curled or folded. Use flat, undamaged paper.
The paper is old or creased.
The paper's size is not
compatible with the printer.
9-16
Troubleshooting
What to do
Take the paper stack out of the feeder,
remove some sheets, and reload the
stack. Before you load paper, check the
amount of paper you can load in the
sheet feeder. See Chapter 6.
Adjust the guides against the stack of
paper. See "Loading Paper" in
Chapter 3.
E
Press the load/eject button. The
printer loads the jammed paper and
then resumes printing. If the error is
not cleared, open the printer cover and
remove the jammed paper, then reload
paper in the sheet feeder, and press the
E
load/eject button. The printer
resumes printing.
Reload the paper so that it fits under
the edge guide tab. See "Loading
Paper" in Chapter 3.
Use only new, smooth sheets of paper.
Use paper that meets the paper
requirements for this printer. See
"Paper" in Appendix C.