Serial Interface - Epson Stylus Color 850 User Manual

Reverse channel
Transmission mode:
Connector:
Synchronization:
Handshaking:
Signal level:
Data transmission
timing:

Serial interface

The printer's built-in serial interface is based on the RS-423 standard. This
interface has the following characteristics:
Standard:
Synchronization:
Bit rate:
Handshaking:
Word format:
Data bit
Parity bit
Start bit
Stop bit
Connector:
Recommended cable:
Optional interface
The available interfaces are listed in Chapter 8. Please see the
specifications in the user's guide packed with the optional interface card.
IEEE-1284 Nibble mode
57-30360 Amphenol Connector or equivalent
Refer to the IEEE-1284 specification
Refer to the IEEE-1284 specification
IEEE-1284 Level 1 device
Refer to the IEEE-1284 specification
Based on RS-423
Synchronous
Approx. 1.8 Mbps
X-ON/X-OFF DTR protocol
8 bits
None
1 bit
1 bit
8-pin mini-DIN
Apple System Peripheral-8 cable
(part number M0197)
C-11
Specifications
C