Switching Each Mode; Switching Audiomode - Sylvania LC200SL8 Owner's Manual

[] Switching Each Mode [] Switching Audio Mode
Youcaneasilyswitchwith the remotecontrol t othe DTV(ATSC) andTV Thissection describes h owtoswitchthe audio in the analogmodeandhow
(NTSC) o rto access a n external device whentheyare connected tothe unit, to switch theaudiolanguage in the digitalmode,
1 Press [INPUT] repeatedly to cycle through analog TV,
digital TV, VIDEO1 and VIDEO2.
-!
[ANALOG MODE]
!
[DIGITAL MODE]
iNPUT
!
_ [VIDEO1 ]
I
[VIDEO2]
• To use tile video or S-video input jack on the unit,
select "VIDEO1 ",
• To use the component video input jack on the unit,
select "VIDEO2",
While receiving an MTS broadcast, press [AUDIO]
repeatedly to cycle through the available audio
channel.
AUDIO
F_AIN]
API
L_ONOl
MAIN : Outputs main-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
• The current mode will automatically disappear in 10
seconds.
Note_
• When you switch the analog mode to the digital mode,
it may take a while until the digital channel selection is
completed. The following TV screen is displayed while
switching the mode.
NOWSCANNING
1 Press [AUDIO] to display the currently selected
language and the number of available languages.
AUDIO
2 Press[AUDIO] repeatedly to cycle through the available
audio languages.
[ENGLISH]
AUDIO
[SPANISH]
[FRENCH]
• Available languages differ depending on the
broadcast. "OTHER" is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.
• The current mode will automatically disappear in 10
seconds.
No re:
• Pressinq AUD O does not control external audio device.
EN