Sylvania LC200SL8 Owner's Manual page 8

[]Attaching a Wall Mount Bracket (sold separately)
Thefollowingisa description ofthe methodforattachinga wall mountto thisunit.
Whenperforming thisoperation, r efertothe instruction manualincluded with thewall mountkit.
Youneedthe following wall mountkit forthisunit.
VisionMount LCD Mounts/ modelnumber: V MFb
Formoreinformation, p lease visitCSAV websiteat www.csavioc.com
(1_ and _:2_, indicate the
position of the screw holes
on this unit.
rear of this unit
stand
1 Turn this unit over and place it screen-first onto a table
which has a soft cloth draped over it.
Place this unit in a way so that the stand hangs over
the edge of the table.
Note"
• Make sureto use a table which can support the weight of this
unit and is larger than this unit.
• Make sure the table is in a stable location.
2 Remove the stands from this unit.
Unscrew the M4 screws indicated by :_1) a nd remove the
stand.
Please be careful with the unit after you remove the
stand.
Note"
• The M4 screws and stand you have removed are necessar,
for reattachment at a later date.
Make sure to keep them in a safe place.
3 Attach the monitor plate to this unit using the 4 bolts
included with the wall mount kit.
You do not need to use the lock washers for mounting
this unit.
IN°'." I
• Only use the screw holes indicated by _2') for mounting this
unit. I
• For instructions on how to attach the monitor plate, refer to
the instruction manual included with the wall mount kit.
EN
Attach this unit to the wall.
No te_
• Refer to the instruction manual included with the wall mount
kit when securing this unit to the wall.
* If you want to attach the stand of this unit again,
insert the stand slowly as illustrated below and drive
M4 screws in the 4 threaded holes (07').
®
@