Switching Each Mode; Switching Audio Mode - Sylvania LC155SC8 Owner's Manual

[] Switching Each Mode
Youcaneasily switchwith the remotecontrol t othe DTV(ATSC) andTV
(NTSC) o rto access a n externaldevice whentheyareconnected tothe unit.
[] Switching Audio Mode
Thissection describes h owto switch the audioin theanalogmodeandhow
toswitchthe audiolanguage in the digitalmode.
Press [INPUT] repeatedly to cycle through analog TV,
digital TV, VIDEO1 and VIDEO2.
[ANALOG MODE]
iNPUT [DIGITAL MODE]
!
[VIDEO1]
[VIDEO2]
ml
• To use the video or S-video input jack on the unit,
select'VIDEO1".
• To use the component video input jack on the unit,
select'VIDEO2".
While receiving an MTS broadcast, press [AUDIO]
repeatedly to cycle through the available audio
channel.
AUDIO
_MAIN]
L_ oNol
MAIN : Outputs main-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
• The current mode will automatically disappear in 10
seconds.
Note:
• When you switch the analog mode to the digital mode,
it may take a while until the digital channel selection is
completed. The following TVscreen is displayed while
switching the mode.
NOWSCANNING
Press [AUDIO] to display the currently selected
language and the number of available languages.
AUDIO
2 Press [AUDIO] repeatedly to cycle through the available
audio languages.
[ENGLISH]
AUDIO
[SPANISH]
[FRENCH]
• Available languages differ depending on the
broadcast. "OTHER" is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.
• The current mode will automatically disappear in 10
seconds.
Note:
• Pressing [AUD O] does not control external audio device.
EN