Switching Each Mode - Sylvania LC155SL8P Owner's Manual

[] Switching Each Mode
Youcaneasilyswitch with the remotecontrol t o theDTV(ATSC) andTV
(NTSC) o r to access an external devicewhenthey are con nettedto the unit.
[] Switching Audio Mode
Thissection describes h owto switch the audio in the analog modeand how
to switch the audio languagein the digitalmode.
Press [INPUT] repeatedly to cycle through the input
modes.
-I
[ANALOG MODE]
!
[DIGITAL MODE]
INPUT
,\ [VIDEO1 ]
I
[VIDEO2]
,,-I
• To use the video or S-video input jack on the unit,
select "VIDEO1 ".
• To use the component video input jack on the unit,
select "Vl DEO2".
While receiving an MTS broadcast, press [AUDIO]
repeatedly to cycle through the available audio
channel.
AUDIO [ ['_MAIN] [_AP] !
I_,,_ONO]
MAIN : Outputs main-audio
SAP : Outputs second audio program
MONa : Outputs mona-audio
• The information display will automatically disappear
in a few seconds.
Note;
• When you switch the analoq mode to the digital mode,
it may take a while until the digital channel selec don is
completed. The followinq TV screen is displayed whil_
switching the mode.
NOW SOANNING
Press [AUDIO] to display the currently selected
language and the number of available languages.
AUDIO
2 Press [AUDIO] repeatedly to cycle through the
available audio languages.
AUDIO
• Available languages differ depending on the
broadcast. "OTHER"is displayed when the audio
language cannot be acquired, or the acquired languages
are other than English, Spanish or French.
• The information display will automatically disappear
in a few seconds.
Note;
• Pressinq [AUDIO] does not control external audio device.
EN