3.
Blue&Me controls
Blue&Me controls
Steering wheel controls
You can control some of the functions of your Blue&Me-TomTom navigation
device using five of the buttons on the steering wheel. To start doing this,
press SRC/OK, use the arrow keys to highlight Satnav, then press SRC/OK
again.
Note: The remaining buttons are used for specific Blue&Me functions, for con-
trolling the volume of the radio and incoming calls, and to activate Blue&Me
voice commands.
A message is displayed on your navigation device if you try to do something
which is not supported by the steering wheel buttons. To control these func-
tions on your device, tap the screen or use voice command and control.
Cluster display
Note: Not all cars support showing navigation instructions in the cluster dis-
play.
Navigation instructions from your Blue&Me-TomTom navigation device are
shown in your car's cluster display.
The display shows the next navigation instruction, the distance to next navi-
gation instruction and the name of the next street.
You can switch the navigation instructions in the cluster display on or off in the
Blue&Me Preferences menu.
Press one of these buttons to open selected items in the menu or
to select or clear checkboxes.
MAIN
Press this button to return to the Driving View and to stop using
the steering wheel buttons to control the navigation device.
Press one of these two buttons to move up or down in a list or
menu.
6