Command And Control; Speaker Preferences; Turn Off Sound / Turn On Sound - TomTom Blue&Me Manual

itored by the microphone on your Blue&Me-TomTom. If there is a lot of noise
in the car, your Blue&Me-TomTom will automatically increase the volume.
For example, if you are driving on the motorway, which is often very noisy, the
volume level on your Blue&Me-TomTom will be increased. When you are driv-
ing more slowly again, the volume level will be lowered by your Blue&Me-
TomTom.

Command and control

Tap Command and control to enable or disable voice command and con-
trol and to see which spoken commands your Blue&Me-TomTom under-
stands.
Command
and control
Important: To use voice control, a computer voice must be installed on
your Blue&Me-TomTom. You can use TomTom HOME to install computer
voices if they are not already installed.
• Enable Command and control - Tap this button to enable voice com-
mand and control.
• Disable Command and control - Tap this button to disable voice com-
mand and control.
• What can I say? - Tap this button to view the list of spoken commands
which are understood by your Blue&Me-TomTom.

Speaker preferences

Tap this button to select which speakers are used by your Blue&Me-
TomTom for sound. The following options are available:
• Internal speaker
Speaker
preferences
• Bluetooth Hi-Fi device
• Line-out (audio cable)

Turn off sound / Turn on sound

Tap this button to turn off sound. If you turn off sound, voice guidance is
also turned off and you no longer hear spoken route instructions.
Turn off sound
Tap this button to turn on sound. When you turn sound on, voice guidance
remains off. To turn on voice guidance, tap Turn on voice guidance in the
Preferences menu.
Turn on sound
39